IEC 60893-3-6:2003/AMD1:2009标准规定了基于硅树脂的工业硬质层压板的规范要求，包括材料的性能、物理性能、机械性能、电气性能等方面的测试方法和要求。该标准适用于电气设备中的绝缘材料，如电机、变压器、开关设备等。

该标准要求硅树脂层压板的厚度应在0.1mm至100mm之间，板材的尺寸应符合生产要求。硅树脂层压板应具有良好的耐热性、耐化学性、耐电弧性、耐电气应力和机械强度等性能。硅树脂层压板的表面应平整、光滑，无气泡、裂纹、污点等缺陷。

在物理性能测试方面，该标准要求硅树脂层压板的密度应在1.8g/cm³至2.2g/cm³之间，水分吸收率应小于0.5%。在机械性能测试方面，硅树脂层压板应具有一定的弯曲强度、冲击强度和拉伸强度等性能。在电气性能测试方面，硅树脂层压板应具有一定的介电强度、介电损耗因数和体积电阻率等性能。

该标准还规定了硅树脂层压板的制造工艺和质量控制要求，以确保产品的稳定性和可靠性。硅树脂层压板应符合相关的国家和地区标准要求，如欧洲标准EN 60893、美国标准NEMA LI 1等。

相关标准
- IEC 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
- IEC 60893-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
- IEC 60893-3-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
- IEC 60893-3-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
- IEC 60893-3-3:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins