IEC 61076-3-101:1997/COR1:2010
Corrigendum 1 - Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
发布时间：2010-04-21 实施时间：


IEC 61076-3-101:1997/COR1:2010标准适用于直流、低频模拟和数字高速数据应用中的连接器。该标准规定了一种屏蔽连接器，具有梯形外壳和非可拆卸矩形接触件，中心距为1.27mm x 2.54mm。该连接器适用于在工业、通信和计算机等领域中使用。

该标准规定了连接器的尺寸、材料、电气和机械性能等方面的要求。连接器的尺寸应符合标准规定，以确保连接器的互换性和兼容性。连接器的材料应具有足够的强度和耐腐蚀性，以确保连接器的长期稳定性。连接器的电气性能应符合标准规定，以确保连接器的信号传输质量。连接器的机械性能应符合标准规定，以确保连接器的插拔次数和机械强度。

该标准还规定了连接器的环境适应性和可靠性要求。连接器应能够在不同的环境条件下正常工作，如温度、湿度、震动和冲击等。连接器的可靠性应符合标准规定，以确保连接器的长期稳定性和可靠性。

总之，IEC 61076-3-101:1997/COR1:2010标准规定了一种屏蔽连接器，具有梯形外壳和非可拆卸矩形接触件，中心距为1.27mm x 2.54mm。该标准还规定了连接器的尺寸、材料、电气和机械性能等方面的要求，以确保连接器的质量和可靠性。

相关标准
- IEC 61076-1:2019 Connectors for electronic equipment - Part 1: Generic specification
- IEC 61076-2-101:2017 Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for connectors with M12 screw-locking with power contacts for industrial environments
- IEC 61076-2-104:2017 Connectors for electronic equipment - Part 2-104: Circular connectors - Detail specification for connectors with M12 screw-locking with data contacts for industrial environments
- IEC 61076-2-109:2018 Connectors for electronic equipment - Part 2-109: Circular connectors - Detail specification for connectors with M12 screw-locking with push-pull locking for industrial environments
- IEC 61076-3-117:2017 Connectors for electronic equipment - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments