IEC 61009-1:2010/AMD1:2012
Amendment 1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
发布时间:2012-04-30 实施时间:


残余电流动作断路器(RCBOs)是一种用于保护电路和人身安全的电器设备。它可以检测到电路中的残余电流,并在电流超过设定值时自动切断电路。RCBOs通常用于家庭和类似用途,如住宅、商业和工业建筑物等。

IEC 61009-1:2010/AMD1:2012是一项关于RCBOs的标准,它规定了RCBOs的一般规则,包括其结构、性能、试验方法和标记等方面的要求。该标准的主要内容如下:

1. 结构要求:RCBOs应具有可靠的结构,能够承受正常使用和异常情况下的负载和环境条件。RCBOs的结构应符合相关的安全标准和规定。

2. 性能要求:RCBOs应具有良好的性能,能够在电路中检测到残余电流,并在电流超过设定值时自动切断电路。RCBOs的动作时间应符合相关的标准和规定。

3. 试验方法:RCBOs应经过一系列的试验,以验证其结构和性能是否符合标准要求。试验包括静态试验、动态试验和环境试验等。

4. 标记要求:RCBOs应在外壳上标明其额定电压、额定电流、额定短路容量、动作时间和制造商等信息。标记应清晰可见,不易磨损和褪色。

此外,IEC 61009-1:2010/AMD1:2012还包括了RCBOs的过电流保护要求。RCBOs应能够在电路中检测到过电流,并在电流超过设定值时自动切断电路。过电流保护的设定值应符合相关的标准和规定。

总之,IEC 61009-1:2010/AMD1:2012是一项关于RCBOs的重要标准,它规定了RCBOs的一般规则和过电流保护要求,有助于保障电路和人身安全。

相关标准
- IEC 61009-2-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-1: Applicability of the general rules to RCBO functionally indepent of line voltage
- IEC 61009-2-2:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-2: Applicability of the general rules to RCBOs with screwless-type terminals (S-type terminals)
- IEC 61009-2-3:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-3: Applicability of the general rules to RCBOs with screw-type terminals (T-type terminals)
- IEC 61009-2-4:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-4: Applicability of the general rules to RCBOs with IEC 60947-2 type breaking capacity
- IEC 61009-2-5:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-5: Applicability of the general rules to RCBOs with a rated residual operating current not exceeding 30 mA